ACE-Lab Pricing Preview | ACE-Lab How would you like to get your ACE-Lab?
Build Your Own ACE-Lab
Build the box yourself using the supplied STL files, bill of materials and assembly guidance.
Build the ACE-Lab yourself
The complete build pack contains the files for ACE-Lab (Base + Sense) and ACE-Lab (Actuate). Use the files for either box, or build both.
ACE-Lab (Base + Sense)
Typical UK self-build ≈ £40Ready-built from ACE-Lab £39
ACE-Lab (Actuate)
Typical UK self-build ≈ £35Ready-built from ACE-Lab £39Request the Complete ACE-Lab Build Pack Email ACE-Lab to request STL files, the bill of materials, sourcing guidance and assembly instructions.Email ACE-Lab for the Build PackBuy a Ready-Built ACE-Lab
Select the ACE-Lab hardware you need, then choose the practical exercises you want to support. ACE-Lab is integrated with MATLAB and Simulink, and your order cost updates automatically, including any applicable bulk discount.
Choose your ready-built ACE-Lab boxes
Choose either of the two ready-built ACE-Lab boxes, or both. Tick the exercises you want inside each selected box; the running total starts at the box price and updates as you add labs.
Bulk Order DiscountOrder more than 25 ACE-Lab rigs and receive a 5% discount. Order more than 50 ACE-Lab rigs and receive a 10% discount. The discount is based on the combined quantity of Base + Sense and Actuate rigs.
Complete Base + Sense with all current exercise hardware: £39.00 incl. VATRequired for ActuateBase + Sense is automatically included because an Actuate exercise is selected. To remove this box, first deselect A1, A2 and A3.£21.25 core hardware incl. VAT
£15.00 ex VAT
Complete Actuate with shared driver, motor/encoder, fan and servo hardware: £39.00 incl. VAT£15.00 core hardware incl. VAT
£12.50 ex VATSupplied ready-built: ACE-Lab hardware is assembled and ready to use. The component lists show the hardware included with the selected ACE-Labs and practical exercises.Next: select your practical exercises ↓ Choose the labs you want to include with your selected ACE-Lab.ACE-Lab (Base + Sense) exercises
Select only the exercises you want to purchase. P1 and P2 use one shared £1.75 foundation set. P3, P4, M1 and M2 also require that same foundation hardware, which is added automatically and charged only once when needed. M3 and M4 are independent sensor sets.
PPreliminary LabsP1LED (Digital)£1.75 shared P1/P2 setCharged once whether P1, P2 or both are selectedQuantityComponents- 1 ×LED
- 1 ×330 Ω resistor
- 2 ×Male-to-male breadboard wires
P2LED (PWM)£1.75 shared P1/P2 setCharged once whether P1, P2 or both are selectedQuantityComponents- 1 ×LED
- 1 ×330 Ω resistor
- 2 ×Male-to-male breadboard wires
P3On/Off Power Switch£2.75 additional hardware+ £1.75 shared foundation if requiredQuantityAdditional component- Uses the same components as P1 and P2
- 1 ×On/Off switch
P4Tactile Button Switch£2.50 additional hardware+ £1.75 shared foundation if requiredQuantityAdditional component- Uses the same components as P1 and P2
- 1 ×Tactile button switch
MMeasurement LabsM1LDR (Light Dependent Resistor)£2.00 additional hardware+ £1.75 shared foundation if requiredQuantityAdditional components- Uses the same components as P1 and P2
- 1 ×LDR
- 1 ×10 kΩ resistor
M2Slide Potentiometer£3.25 additional hardware+ £1.75 shared foundation if requiredQuantityAdditional component- Uses the same components as P1 and P2
- 1 ×Slide potentiometer
M3Ultrasonic Sensor (Distance)£3.00 exercise hardwareQuantityComponents- 1 ×Ultrasonic sensor
- 4 ×Male-to-male breadboard wires
M4Temperature Sensor£2.50 exercise hardwareQuantityComponents- 1 ×TMP36 temperature sensor
- 3 ×Male-to-male breadboard wires
ACE-Lab (Actuate) exercises
Choose any combination of A1, A2 and A3. Selecting any Actuate exercise automatically adds the required ACE-Lab (Base + Sense) box to your order. A1 and A2 share one motor driver: if you select both, the driver is supplied and charged only once.
Battery: the 9V battery required for the DC Motor with Encoder exercise is not supplied.A1 DC Motor with Encoder LabsA1 DC Motor with EncoderIncludes- Speed measurement, PI control, manual tuning and automatic tuning.
- 1 ×DC motor with encoder
- 1 ×Motor driver with H-bridge
- 1 ×9V power jack
- 3 ×Male-to-female breadboard wires
£15.00 including the shared motor driver £7.00 encoder hardware + £8.00 driver. The driver is charged only once if A2 is also selected.QuantityA2 DC Motor Fan LabsA2 DC Motor FanIncludes- 1 ×DC motor cooling fan
- 1 ×Motor driver with H-bridge (shared with A1)
£12.00 including the shared motor driver £4.00 fan hardware + £8.00 driver. If A1 is already selected, A2 adds only £4.00.QuantityA3 Servomotor LabsA3 ServomotorIncludes- 1 ×Servomotor for position-control exercises
£5.00 servomotor hardwareQuantityACE-Lab Consulting Ltd | Company No. 17377293 | www.ace-lab.co.uk
Customer-facing prices show VAT-inclusive costs. Delivery is added at checkout. The quotation / PO provides the VAT breakdown separately. Bulk discounts and valid promotional discount codes are applied before VAT; promotional codes do not stack with bulk discounts.