ACE-Lab Pricing Preview | ACE-Lab How would you like to get your ACE-Lab?
Build Your Own ACE-Lab
Build the box yourself using the supplied STL files, bill of materials and assembly guidance.
Build the ACE-Lab yourself
The complete build pack contains the files for ACE-Lab (Base + Sense) and ACE-Lab (Actuate). Use the files for either box, or build both.
ACE-Lab (Base + Sense)
Typical UK self-build ≈ £40Ready-built from ACE-Lab £39
ACE-Lab (Actuate)
Typical UK self-build ≈ £35Ready-built from ACE-Lab £34Complete ACE-Lab Build Pack STL files, bill of materials, component sourcing guidance and assembly instructions for both Base + Sense and Actuate.Download Complete Build PackBuy a Ready-Built ACE-Lab
Select the ACE-Lab hardware you need, then choose the practical exercises you want to support. ACE-Lab is integrated with MATLAB and Simulink, and your order cost updates automatically, including any applicable bulk discount.
1. Select your ACE-Labs
Choose ACE-Lab (Base + Sense), ACE-Lab (Actuate), or both, then set the quantity required for each. Selecting an ACE-Lab opens the compatible practical exercises below.
Bulk Order DiscountOrder more than 25 ACE-Lab rigs and receive a 5% discount. Order more than 50 ACE-Lab rigs and receive a 10% discount. The discount is based on the combined quantity of Base + Sense and Actuate rigs.
Complete Base + Sense with all current exercise hardware: £39.00 incl. VAT£21.25 core hardware incl. VAT
£15.00 ex VAT
Complete Actuate with shared driver, motor/encoder, fan and servo hardware: £33.00 incl. VAT£8.00 core hardware incl. VAT
£6.67 ex VATSupplied ready-built: ACE-Lab hardware is assembled and ready to use. The component lists show the hardware included with the selected ACE-Labs and practical exercises.Next: select your practical exercises ↓ Choose the labs you want to include with your selected ACE-Lab.ACE-Lab (Base + Sense) exercises
Select only the exercises you want to purchase. P1 and P2 use one shared £1.50 foundation set. P3, P4, M1 and M2 also require that same foundation hardware, which is added automatically and charged only once when needed. M3 and M4 are independent sensor sets.
PPreliminary LabsP1LED (Digital)£1.75 shared P1/P2 setCharged once whether P1, P2 or both are selectedQuantityComponents- 1 ×LED
- 1 ×330 Ω resistor
- 2 ×Male-to-male breadboard wires
P2LED (PWM)£1.75 shared P1/P2 setCharged once whether P1, P2 or both are selectedQuantityComponents- 1 ×LED
- 1 ×330 Ω resistor
- 2 ×Male-to-male breadboard wires
P3On/Off Power Switch£2.75 additional hardware+ £1.75 shared foundation if requiredQuantityAdditional component- Uses the same components as P1 and P2
- 1 ×On/Off switch
P4Tactile Button Switch£2.50 additional hardware+ £1.75 shared foundation if requiredQuantityAdditional component- Uses the same components as P1 and P2
- 1 ×Tactile button switch
MMeasurement LabsM1LDR (Light Dependent Resistor)£2.00 additional hardware+ £1.75 shared foundation if requiredQuantityAdditional components- Uses the same components as P1 and P2
- 1 ×LDR
- 1 ×10 kΩ resistor
M2Slide Potentiometer£3.25 additional hardware+ £1.75 shared foundation if requiredQuantityAdditional component- Uses the same components as P1 and P2
- 1 ×Slide potentiometer
M3Ultrasonic Sensor (Distance)£3.00 exercise hardwareQuantityComponents- 1 ×Ultrasonic sensor
- 4 ×Male-to-male breadboard wires
M4Temperature Sensor£2.50 exercise hardwareQuantityComponents- 1 ×TMP36 temperature sensor
- 3 ×Male-to-male breadboard wires
ACE-Lab (Actuate) exercises
Select the exercises you want to purchase. DC Motor Control and DC Motor Cooling Fan use the same motor driver. If either is selected, one driver is included automatically. If both are selected, the same driver is used and only one is supplied.
Please note: a 9V battery is required for the DC Motor Control exercise. The battery is not supplied as part of the kit and must be sourced separately.AActuator LabsA1 DC Motor Control£12.00 including the required motor driverQuantityIncludes- Covers initial setup, speed measurement, manual tuning and automatic tuning within one DC motor control exercise route.
- 1 ×DC motor with encoder
- 1 ×Motor driver with H-bridge
- 1 ×9V power jack
- 4 ×Male-to-female breadboard wires
- 2 ×Male-to-male breadboard wires
A2 DC Motor Cooling Fan£12.00 including the required motor driverQuantityComponents- 1 ×DC cooling fan
- 1 ×Motor driver with H-bridge
A3 Servomotor Position Control£10.00 servo hardwareQuantityComponent- 1 ×Servomotor
ACE-Lab Consulting Ltd | Company No. 17377293 | www.ace-lab.co.uk
Customer-facing prices show VAT-inclusive costs. Delivery is added at checkout. The quotation / PO provides the VAT breakdown separately. Bulk discounts and valid promotional discount codes are applied before VAT; promotional codes do not stack with bulk discounts.Powered By